| >>>>>>
YGM95 High Pressure Suspension Grinder/grinder |
|
| Company
Name: Zhengzhou Vipeak Heavy Industry Machinery Co., Ltd
|
YGM95 High Pressure Suspension Grinder is suitable for producing minerals powder, which is widely used in the fields of
metallurgy, building materials, chemical, and mining industry and so on. It can be used for grinding sand, feldspar, calcite,
talc, barite, fluorspar, rare earth, marble, ceramic, aluminum vanadium earth, manganese ore, iron ore, copper ore, phosphate
ore, iron oxide red, slag, granulated slag, cement clinker, active carbon, dolomite, granite, garnet, iron oxide yellow, bean
cake, chemical fertilizer, compound fertilizer, coal ash,soft coal,lignite, chrome oxide green , gold ore, red mud, clay,
kaoline, coke, gangue, porcelain clay, kyanite, fluorte , bentonite, muddy greenstone, leaf, shale, purple sand and crushed
stone, green muddy crag, basalt, gypsum, graphite, carborundum, heat resistance material and some other materials that Moh's
hardness is below 9.3, and humidity is 6%, non-flammable non-explosive minerals.
1. Compared with other mills, the output can increase 10-20% under the same condition. The grinding pressure by rollers to
the materials can add to 800-1200Kg on account of the high pressure spring.
2. Minerals that Moh's hardness is below scale 9.3 can be processed.
3. The final products size is extensive, from 0.613mm (30mesh) to 0.033mm (425mesh), and the finest powder can reach to
0.013mm (1000mesh).
4. The dust-removing effect can fully conform to the national standard.
5. The separator is convenient to adjust.
6. The grinding equipments adopt lapping multilevel seal, which is very effective.
Rollers(Pcs): 4
Diameter*Height of Rollers(mm): 310×170
Diameter of Rollers(mm):950
Rotational Speed of the main frame : 30
Max feeding size mm 20-25
The final product Size (mm):0.9510.033,powder can be 0.013
Capacity(T/H):3.5-5
Dimension(L× W×H)(m):7.1×5.9×7.9
Note: the above data is the standard output under 85% sieve-passing rate for grinding limestone; the final product size is
0.075 millimeters (200 meshes).
|
|
