| Company
Name: Anhope Machinery Co., Ltd.
|
The compression resistance of the plastic tube is just like metal tube. The working compression stress 1MPa,bursting pressure 6MPa.
The fastness to temperature:-7095(in shore brief 110). The thermal and heat insulation is preferable.
Corrosion resistant,and resistant to acid and alkali of the is very preferable,is fit for transporting chemical substansis. It is very clear and free form contaminatin.
The outside and the inside of the tube are very smooth. The resisting force is small,it is not incrusive. The flow of this tube higher than galvanized tube of 30.
The special fitting is assorted for this tube .It is safe and convenient. The threading and hitch and the jointing are not necessary.
It is easy to bend , the tube is gentle but firm, It is to economize the fittings,compared with the galranized tube, the cost of adjustment will be saved for 50.
model PEXG-16/50 PEXG-63/110
Production spec DN16DN50 DN63DN110
Production ability 70kg/h 120kg/h
Production line speed 3-12m/min 2-8m/min
Cooling water consumption 2000L/h 4000L/h
Main motor power 55kw 90kw
Total length of productin line 15m 20m
Note: The parameter is subject to change without notice.
|
| Company Name: |
Anhope Machinery Co., Ltd. |
| Address: |
21/F, Moder manszon, NO. 319, zhongshannan road, Nanjing, Jiangsu Province, China |
| Contact Person: |
Frank Guo |
| Tel: |
86-25-52334463 |
| Fax: |
86-25-52334465 |
| E-mail: |
|
| IP: |
117.88.139.9 (2008-7-3 10:34:57) |
|
|
|
